Mitsubishi Electronics QD75MH2 ユーザーズマニュアル
5 - 151
MELSEC-Q
5 DATA USED FOR POSITIONING CONTROL
Storage buffer
memory address
Setting value
Default
value
Axis 1 Axis 2 Axis 3 Axis 4
Set with a decimal.
Setting
value
value
Positioning data No.
1 to 600
7000 to7004
9001
9002
9003
9004
7000 to7004
9001
9002
9003
9004
K
: Positioning data No.
: Block start designation
: Machine OPR
: Fast-OPR
: Current value changing
: Simultaneous starting of multiple axes
: Block start designation
: Machine OPR
: Fast-OPR
: Current value changing
: Simultaneous starting of multiple axes
0
1500 1600 1700 1800
Set with a decimal.
Setting
value
value
K
Positioning starting point No.
The value is set to "0" by the QD75MH automatically when the continuous
operation is interrupted.
operation is interrupted.
1 to 50
0
1501 1601 1701 1801
Set with a decimal.
K 1
Error reset request
Setting value
After the axis error reset is completed, "0" is stored by the QD75MH automatically.
(Indicates that the axis error reset is completed.)
(Indicates that the axis error reset is completed.)
1: Axis error is reset.
0
1502 1602 1702 1802
Set with a decimal.
K
1
Restart command
Setting value
After restart acceptance is completed, "0" is stored by the QD75MH automatically.
(Indicates that the restart acceptance is completed.)
(Indicates that the restart acceptance is completed.)
1: Restarts
0
1503 1603 1703 1803
Set with a decimal.
K
1
M code OFF request
Setting value
After the M code ON signal turns OFF, "0" is stored by the QD75MH automatically.
(Indicates that the OFF request is completed.)
(Indicates that the OFF request is completed.)
1: M code ON signal turns OFF
0
1504 1604 1704 1804