Zebra Technologies UMAN-QLP-001 ユーザーズマニュアル

ページ / 86
51
QL Plus Series User Guide
Preventive Maintenance
Extending Battery Life
•  Never expose the battery to direct sunlight or tempera-
tures over 104° F (40° C).
•  Do not charge the battery when the temperature exceeds
113° F (45° C).
•  Always use a Zebra charger designed specifically for
Lithium-Ion batteries.  Use of any other kind of charger 
may damage the battery.
•  Use the correct media for your printing requirements. An
authorized Zebra re-seller can help you determine the op-
timum media for your application.
•  If you print the same text or graphic on every label, con-
sider using a pre-printed label.
•  Choose the correct print darkness, and print speed for
your media.
•  Use software handshaking (XON/XOFF) whenever possi-
ble.
•  Select Tear-Off mode whenever possible (Peel-Off mode
uses more power).
•  If your printer has the optional LCD display, use the dis-
play backlight only when necessary.  Turn it off whenever 
it is not needed.
•  Remove the battery if the printer won’t be used for a
day or more and you’re not performing a maintenance 
charge.
•  Consider purchasing an extra battery.
•  Remember that any rechargeable battery will lose its
ability to maintain a charge over time.  It can only be re-
charged a finite number of times before it must be re-
placed. Always dispose of batteries properly. Refer to 
Appendix E for more information on battery disposal.
Caution • Do not print while the LI72 Wall Charger is plugged into the
unit. Unreliable battery charging can result.