DELL 1U920 ユーザーズマニュアル

S e t u p   a n d   Q u i c k   Re f e r e n c e   G u i d e

25

From the Drivers and Utilities CD:

1

Insert the 

Drivers and Utilities CD into the CD drive.

2

Shut down and restart the computer.

When the DELL logo appears, press <F12> immediately.
If you wait too long and the Windows logo appears, continue to wait until you see 
the Windows desktop. Then shut down your computer through the Start menu and 
try again.

 NOTE: This feature changes the boot sequence for one time only. On the next start-up, 

the computer boots according to the devices specified in system setup.

3

When the boot device list appears, highlight IDE CD-ROM Device

 

and 

press <Enter>.

4

Select the IDE CD-ROM Device option from the CD boot menu.

5

Select the Boot from CD-ROM option from the menu that appears.

6

Type 

1

 to start the ResourceCD menu.

7

Type 

2

 to start the Dell Diagnostics.

8

Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions 
are listed, select the version appropriate for your platform.

9

When the Dell Diagnostics Main Menu appears, select the test you want to run.

10

When the tests are completed, remove the CD.

Running the Dell IDE Hard-Drive Diagnostics

The Dell IDE Hard-Drive Diagnostics is a utility that tests the hard drive to troubleshoot 
or confirm a hard-drive failure.

1

Turn on your computer (if your computer is already on, restart it).

2

When 

F2 = Setup

 appears in the upper-right corner of the screen, press 

<Ctrl><Alt><D>.

3

Follow the instructions on the screen.

If a failure is reported, see "Hard Drive Problems" in your 

User’s Guide.