DELL 8132 ユーザーズマニュアル

IPv6 Routing Commands

Use ping ipv6 command in Privileged EXEC mode to determine whether 

another computer is on the network. To use the command, configure the 

switch for network (in-band) connection. The source and target devices must 

have the ping utility enabled and running on top of TCP/IP. The switch can 

be pinged from any IP workstation with which the switch is connected 

through the default VLAN (VLAN 1), as long as there is a physical path 

between the switch and the workstation. The terminal interface sends three 

pings to the target station. 

 {ip-address | hostname} [size size] 

•

ipv6-address — Target IPv6 address to ping.

•

hostname — Hostname to ping (contact). (Range: 1–158 characters). The 

command allows spaces in the host name when specified in double quotes. 

For example, console(config)#ping ipv6 "host name"

•

size — Size of the datagram. (Range: 48–2048 bytes)

This command has no default configuration.

Privileged EXEC mode

This command has no user guidelines.

The following example determines whether another computer is on the 

network at the IPv6 address specified.

console#ping ipv6 2030:1::1/64

Send count=3, Receive count=0 from 2030:1::1/64

Average round trip time = 0.00 ms

2CSPC4.X8100-SWUM102.book  Page 1111  Friday, March 15, 2013  8:56 AM