DELL 8132 ユーザーズマニュアル

IPv6 Routing Commands

Privileged EXEC mode, Config mode and all Config sub-modes

This command has no user guidelines.

console#show ipv6 interface management statistics 

DHCPv6 Client Statistics 

------------------------- 

DHCPv6 Advertisement Packets Received.......... 0 

DHCPv6 Reply Packets Received.................. 0 

Received DHCPv6 Advertisement Packets Discard.. 0 

Received DHCPv6 Reply Packets Discarded........ 0 

DHCPv6 Malformed Packets Received.............. 0 

Total DHCPv6 Packets Received.................. 0 

DHCPv6 Solicit Packets Transmitted............. 0 

DHCPv6 Request Packets Transmitted............. 0 

DHCPv6 Renew Packets Transmitted............... 0 

DHCPv6 Rebind Packets Transmitted.............. 0 

DHCPv6 Release Packets Transmitted............. 0 

Total DHCPv6 Packets Transmitted............... 0 

The show ipv6 mld groups command is used to display information about 

multicast groups that MLD reported. The information is displayed only when 

MLD is enabled on at least one interface. If MLD was not enabled on any 

interfaces, there is no group information to be displayed.

2CSPC4.X8100-SWUM102.book  Page 1117  Friday, March 15, 2013  8:56 AM