DELL 8132 ユーザーズマニュアル

Virtual Router Redundancy Protocol Commands

This command accepts any printable characters for the name. Descriptions 

containing spaces must be wrapped with quotes.

The following example creates virtual router group 5 on VLAN 15 and 

configures its description.

console(config)#interface vlan 15

console(config-if-vlan15)#vrrp 5

console(config-if-vlan15)#vrrp 5 description “Sales and Marketing”

Use the vrrp ip command in Interface Configuration mode to enable VRRP 

and set the virtual router IP address value for an interface. Use the no form of 

the command remove the secondary IP address. It is not possible to remove 

the primary IP address once assigned. Remove the VRRP group instead.

group ip ip-address [secondary]

group ip ip-address vlan secondary

VRRP is not configured on the interface.

Interface Configuration (VLAN) mode.

group

The virtual router identifier. (Range: 1-255)

ip-address

The IP address of the virtual router.

secondary

Designates the virtual router IP address as a secondary IP 

address on an interface.

2CSPC4.X8100-SWUM102.book  Page 1385  Friday, March 15, 2013  8:56 AM