DELL 8132 ユーザーズマニュアル
Configuration and Image File Commands
1485
User Guidelines
Use the show bootvar command to find out which image is the active image.
Example #1
The image1 and image2 keywords are deprecated on the PC81xx only.
The following example loads system image image1 for the next device
The following example loads system image image1 for the next device
startup.
console# boot system image1
Example #2
The following example applies to
PC81xx only.
console #boot system ?
active Marks the given image as active for subsequent re-boots.
backup Marks the given image as active for subsequent re-boots.
console#show version
Image Descriptions
active :
backup :
Images currently available on Flash
unit active backup current-active next-active
----- -------- ------------ ----------------- -------------
1 <none> <none>
2 5.0.0.7 5.0.0.9 5.0.0.7 5.0.0.9
clear config
Use the clear config command in Privileged EXEC mode to restore the
switch to the default configuration.
Syntax
clear config
2CSPC4.X8100-SWUM102.book Page 1485 Friday, March 15, 2013 8:56 AM