DELL 8132 ユーザーズマニュアル
System Management Commands
1695
media-type
Select the media-type command for the interface. This command is only
valid on combo ports.
Syntax
media-type { auto-select [rj45 | sfp ] | rj45 | sfp }
Parameter Description
Default Configuration
The default is media-type auto-select sfp.
Command Mode
Interface Config
User Guidelines
When both media types are connected, the preference as determined by the
auto-select keyword parameter selects the active media. When the auto-select
keyword is not specified, the selected media type is powered on and the
alternate media type is powered off. Note that when the auto-select keyword
is used with any media type, the SFP port will remain powered and the laser, if
any, will remain on in order to allow connections over the SFP port.
Example
! Select the RJ45 port and power off the SFP port
console(config-if-Te1/0/24)#media-type rj45
Parameter
Description
auto-select rj45
Utilize RJ45 media when both media types are active.
auto-select sfp
Utilize the SFP media when both media types are active.
auto-select
Return the selection to the default (auto-select sfp)
rj45
Force connection on the RJ45 port. Power off SFP media port.
sfp
Force connection on the SFP port. Power off RJ45 media port.
2CSPC4.X8100-SWUM102.book Page 1695 Friday, March 15, 2013 8:56 AM