DELL 8132 ユーザーズマニュアル

Address Table Commands

No static addresses are defined. The default mode for an added address is 

permanent.

Global Configuration mode

The MAC address may be a unicast or multicast MAC address. Static MAC 

addresses are never overridden by dynamically learned addresses. This has 

implications for protocols like IGMP snooping, where statically configuring 

the MAC address of a multicast router keeps IGMP snooping from 

dynamically adding the multicast router to a different port.

The following example adds a permanent static MAC-layer station source 

address c2f3.220a.12f4 to the MAC address table.

console(config)# mac address-table static 

c2f3.220a.12f4 vlan 4 interface gigabitethernet6/0/1

Use the port security command in Interface Configuration mode to disable 

the learning of new addresses on an interface. To enable new address learning, 

use the no form of the port security command.

mac-address

A valid MAC address in the format xxxx.xxxx.xxxx or 

xx:xx:xx:xx:xx:xx

vlan-id

Valid VLAN ID (1-4093)

interface-id

The interface to which the received packet is forwarded. 

2CSPC4.X8100-SWUM102.book  Page 304  Friday, March 15, 2013  8:56 AM