DELL 8132 ユーザーズマニュアル
DHCP Snooping Commands
365
no ip dhcp snooping database write-delay
Parameter Description
Default Configuration
The write delay is 300 seconds by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip dhcp snooping database write-delay 500
ip dhcp snooping limit
Use the ip dhcp snooping limit command to control the maximum rate of
DHCP messages. Use the no form of this command to reset the limit to the
default.
Syntax
ip dhcp snooping limit {none | rate
rate [burst interval seconds]}
no ip dhcp snooping limit
•
rate—The maximum number of packets per second allowed (Range:
0–300 pps).
•
seconds—The time allowed for a burst (Range: 1–15 seconds).
Default Configuration
DHCP snooping rate limiting is 15 packets per second.
Parameter
Description
seconds
The write delay (Range: 15–86400 seconds).
2CSPC4.X8100-SWUM102.book Page 365 Friday, March 15, 2013 8:56 AM