DELL 8132 ユーザーズマニュアル

Ethernet Configuration Commands

Use the show interfaces description command in User EXEC mode to 

display the description for all configured interfaces. 

show interfaces description [gigabitethernet unit/slot/port | port-channel 

port-channel-number | tengigabitethernet unit/slot/port 

| 

fortygigabitethernet unit/slot/port]

FCS Errors

Counted frames received that are an integral number of 

octets in length but do not pass the FCS check. 

Single Collision Frames Counted frames that are involved in a single collision, and 

are subsequently transmitted successfully.

Multiple Collision 

Frames

A count of frames that are involved in a multiple collision, 

and are subsequently transmitted successfully

Deferred
Transmissions

A count of frames for which the first transmission attempt 

is delayed because the medium is busy

Late Collisions

Counted times that a collision is detected later than one 

slot time into the transmission of a packet.

Excessive Collisions

Counted frames for which transmission fails due to 

excessive collisions.

Oversize Packets

Counted frames received that exceed the maximum 

permitted frame size.

Internal MAC Rx Errors A count of frames for which reception fails due to an 

internal MAC sublayer receive error.

Received Pause Frames A count of MAC Control frames received with an opcode 

indicating the PAUSE operation.

Transmitted Pause 

Frames

Counted MAC Control frames transmitted on this 

interface with an opcode indicating the PAUSE operation.

Received PFC Frames

A count of the received Priority Flow Control (PFC) 

frames.

Transmitted PFC 

Frames

A count of the transmitted PFC frames.

2CSPC4.X8100-SWUM102.book  Page 418  Friday, March 15, 2013  8:56 AM