DELL 8132 ユーザーズマニュアル
420
Ethernet Configuration Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays detailed status and configuration of the
specified interface.
console#show interfaces detail gi1/0/1
Port Type Duplex Speed Neg Admin Link
State State
----- ------------------------------ ------ ------- ---- ----- -----
Gi1/0/1Gigabit - Level N/A Unknown Auto Up Down
Port Description
------ --------------------------------------------------------------------
Gi1/0/1
Flow Control:Enabled
Port: Gi1/0/1
VLAN Membership mode:Access Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status:Disabled
Protected:Disabled
Port Gi1/0/1 is member in:
interface-id
A physical interface or port channel identifier.
2CSPC4.X8100-SWUM102.book Page 420 Friday, March 15, 2013 8:56 AM