DELL 8132 ユーザーズマニュアル

Ethernet Configuration Commands

console#show storm-control

802.3x Flow Control Mode.................... Disable

Use the shutdown command in Interface Configuration mode to disable an 

interface. To restart a disabled interface, use the no form of this command.

The interface is enabled.

Interface Configuration (Ethernet, Port-Channel, Tunnel, Loopback) mode

This command has no user guidelines.

The following example disables gigabit Ethernet port 1/0/5.

console(config)#interface gigabitethernet 1/0/5

console(config-if-1/0/5)# shutdown

The following example re-enables gigabit ethernet port 1/0/5.

console(config)#interface gigabitethernet 1/0/5

console(config-if-1/0/5)# no shutdown

Use the speed command in Interface Configuration mode to configure the 

speed of a given Ethernet interface. To restore the default, use the no form of 

this command.

2CSPC4.X8100-SWUM102.book  Page 429  Friday, March 15, 2013  8:56 AM