DELL 8132 ユーザーズマニュアル

IP Addressing Commands

console(config-if)#

Use the ip address command in Interface Configuration mode to set an IP 

address for the out-of-band interface. Use the no form of this command to 

return the ip address configuration to its default value.

ip address {

ip-address {mask | prefix-length} | dhcp}

The out-of-band interface (service port) obtains an IP address via DHCP by 

default.

Interface (Out-of-Band) Configuration mode

When setting the netmask/prefix length on an IPv4 address, a space is 

required between the address and the mask or prefix length. Setting an IP 

address on the out-of-band port enables switch management over the service 

port.

ip-address

 

Specifies a valid IP address.

mask

Specifies a valid subnet (network) mask IP address.

prefix-length

The number of bits that comprise the IP address prefix. The 

prefix length must be preceded by a forward slash (/). (Range: 1-

30 bits)

dhcp

Obtain the out-of-band interface

 

address via DHCPv4.

2CSPC4.X8100-SWUM102.book  Page 492  Friday, March 15, 2013  8:56 AM