DELL 8132 ユーザーズマニュアル
IP Addressing Commands
493
In order to ensure the security of the switches from intruders, it is strongly
recommended that the out-of-band interface be isolated on a physically
separate network from the in-band ports.
Example
The following examples configure the out-of-band interface with an IP
address 131.108.1.27 and subnet mask 255.255.255.0 and the same IP address
with prefix length of 24 bits.
console(config)#interface out-of-band
console(config-if)#ip address 131.108.1.27 255.255.255.0
console(config-if)#ip address 131.108.1.27 /24
ip address-conflict-detect run
Use the ip address-conflict-detect run command in Global Configuration
mode to trigger the switch to run active address conflict detection by sending
gratuitous ARP packets for IPv4 addresses on the switch.
Syntax
ip address–conflict–detect run
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
Example
console#
2CSPC4.X8100-SWUM102.book Page 493 Friday, March 15, 2013 8:56 AM