DELL 8132 ユーザーズマニュアル

ページ / 1818
IP Addressing Commands
495
• The IPv4 address of a default gateway. If the device learns different default 
gateways on different interfaces, the system uses the first default gateway 
learned. The system installs a default route in the routing table, with the 
default gateway’s address as the next hop address. This default route has a 
preference of 254.
• The IPv4 address of a DNS server. The DNS client stores each DNS server 
address in its server list.
• A domain name. The DNS client stores each domain name in its domain 
name list. 
Examples
To enable DHCPv4 on vlan 2:
console#config
console(config)#interface vlan 2
console(config-if-vlan2)#ip address dhcp
ip default-gateway
Use the ip default-gateway command in Global Configuration mode to 
configure a default gateway (router). 
Syntax
ip default-gateway 
ip-address
no ip default-gateway 
ip-address
Parameter Description
Default Configuration
No default gateway is defined.
Parameter
Description
ip-address
Valid IPv4 address of an attached router.
2CSPC4.X8100-SWUM102.book  Page 495  Friday, March 15, 2013  8:56 AM