DELL 8132 ユーザーズマニュアル

LLDP Commands

Use the lldp transmit command in Interface Configuration mode to enable 

the LLDP advertise (transmit) capability. To disable local data transmission, 

use the no form of this command.

LLDP is enabled on all supported interfaces.

Interface Configuration (Ethernet) mode

This command has no user guidelines.

The following example displays how enable the transmission of local data.

console(config-if-1/0/3)#lldp transmit

Use the lldp transmit-mgmt command in Interface Configuration mode to 

include transmission of the local system management address information in 

the LLDPDUs. To cancel inclusion of the management information, use the 

no form of this command.

2CSPC4.X8100-SWUM102.book  Page 577  Friday, March 15, 2013  8:56 AM