DELL 8132 ユーザーズマニュアル

ページ / 1818
578
LLDP Commands
Default Configuration
By default, management address information is not included.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to include management information in 
the LLDPDU.
console(config-if-1/0/3)#lldp transmit-mgmt
lldp transmit-tlv
Use the lldp transmit-tlv command in Interface Configuration mode to 
specify which optional type-length-value settings (TLVs) in the 802.1AB basic 
management set will be transmitted in the LLDPDUs. To remove an optional 
TLV, use the no form of this command.
Syntax
lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
no lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
• sys-name — Transmits the system name TLV
sys-desc — Transmits the system description TLV
• sys-cap — Transmits the system capabilities TLV
port desc — Transmits the port description TLV
Default Configuration
By default, no optional TLVs are included.
Command Mode
Interface Configuration (Ethernet) mode
2CSPC4.X8100-SWUM102.book  Page 578  Friday, March 15, 2013  8:56 AM