DELL 8132 ユーザーズマニュアル

RADIUS Commands

When enabling accounting for exec mode for the current line-configuration 

type, users logged in with that mode will be logged out.

Use the following command to enable exec type accounting for telnet.

console(config)#line telnet 

console(config-telnet)# accounting exec default

Use the acct-port command to set the port that connects to the RADIUS 

accounting server. Use the no form of this command to reset the port to the 

default.

acct-port 

port

•

port — The layer 4 port number of the accounting server (Range: 1 - 

65535).

The default value of the port number is 1813.

Radius (accounting) mode

There are no user guidelines for this command.

The following example sets port number 56 for accounting requests.

console(config)#radius-server host acct 3.2.3.2

2CSPC4.X8100-SWUM102.book  Page 706  Friday, March 15, 2013  8:56 AM