DELL 8132 ユーザーズマニュアル
RADIUS Commands
707
console(Config-acct-radius)#acct-port 56
auth-port
Use the auth-port command in Radius mode to set the port number for
authentication requests of the designated Radius server.
Syntax
auth-port
auth-port-number
•
auth-port-number — Port number for authentication requests. (Range: 1 -
65535)
Default Configuration
The default value of the port number is 1812.
Command Mode
Radius mode
User Guidelines
The host is not used for authentication if set to 0.
User must enter the mode corresponding to a specific Radius server before
User must enter the mode corresponding to a specific Radius server before
executing this command.
Example
The following example sets the port number 2412 for authentication
requests.
console(config)#radius-server host 192.143.120.123
console(config-radius)#auth-port 2412
deadtime
Use the deadtime command in Radius mode to configure the minimum
amount of time to wait before attempting to re-contact an unresponsive
RADIUS server. If a RADIUS server is currently active and responsive, that
2CSPC4.X8100-SWUM102.book Page 707 Friday, March 15, 2013 8:56 AM