DELL 8132 ユーザーズマニュアル

Data Center Bridging Commands

The default value is to transmit all DCBX TLVs as received from the auto-

configuration configuration source port. In manual mode, the default is to 

transmit all DCBX TLVs per the switch (global or interface) configuration.

Global Config, Interface Config

Global configuration and interface configuration are separate. Interface 

configuration overrides the global configuration on a configured interface. 

The PC8024 proxies ETS TLVs received from the configuration source to the 

other auto-configured ports while not acting upon them. The PC81xx both 

processes and proxies ETS TLVs received from the configuration source as 

well as generates ETS TLVs on manually configured ports.

The following example configures the port to not transmit any DCBX TLVs.

console(interface-config-te1/0/1)#no lldp tlv-select dcbxp

The following example globally configures all ports to not transmit any DCBX 

TLVs.

console(config)#no dcb enable

Use the lldp dcbx port-role command in Interface Configuration mode to 

configure the port role to manual, auto-upstream, auto-downstream and 

configuration source. The default port role is manual.

Pfc

Transmit the PFC configuration TLV.

Application-priority Transmit the application priority TLV.
Congestion-

notification

Transmit the congestion notification TLV.

2CSPC4.X8100-SWUM102.book  Page 881  Friday, March 15, 2013  8:56 AM