DELL R9730 ユーザーズマニュアル
16
Quick Reference Guide
www
.dell.com | support.dell.com
Back-Panel Connectors
4
voltage selection switch
Your computer is equipped with a manual voltage-selection switch.
To avoid damaging a computer with a manual voltage-selection switch, set the
switch to the voltage that most closely matches the AC power available in your
location.
switch to the voltage that most closely matches the AC power available in your
location.
NOTICE:
In Japan, the voltage selection switch must be set to 115-V.
Also, ensure that your monitor and attached devices are electrically rated to
operate with the AC power available in your location.
operate with the AC power available in your location.
5
padlock ring
Insert a padlock to lock the computer cover.
6
cover release latch
Use this latch to open the computer cover.
1
3
10
9
8
5
6
7
2
4
1
parallel connector
Connect a parallel device, such as a printer, to the parallel connector. If you have a
USB printer, plug it into a USB connector.
USB printer, plug it into a USB connector.
NOTE:
The integrated parallel connector is automatically disabled if the computer
detects an installed card containing a parallel connector configured to the same
address. For more information, see "System Setup Options" in your online User’s
Guide.
address. For more information, see "System Setup Options" in your online User’s
Guide.
2
link integrity light
• Green — A good connection exists between a 10-Mbps network and the
computer.
• Orange — A good connection exists between a 100-Mbps network and the
computer.
• Yellow — A good connection exists between a 1-Gbps (or 1000-Mbps) network
and the computer.
• Off — The computer is not detecting a physical connection to the network.