HP (Hewlett-Packard) D3J88UT#ABA ユーザーズマニュアル

Follow these steps to configure an Integrated Mirroring Extended (IME) volume. The procedure assumes

the system has the required disk and disk controllers.

If an odd number of drives are used, a RAID 1E array is created. If an even number of drives

are used, a RAID 10 array is created.

During BIOS startup, press 

Ctrl-C

 when prompted to start the LSI Logic Configuration Utility.

Using the arrow keys, navigate to:

a. An appropriate adapter, then press 

Enter.

b. RAID Properties, then press 

Enter.

Create IME Volume, then press 

Enter.

To configure a mirrored volume or an optional hot spare drive with up to the maximum number of

drives allowed for the workstation:

a. In the Create New Array screen, select the primary disk for the IME volume (the disk with

the data you want to mirror.)

b. Navigate to the RAID Disk column for this disk, then use the 

Space

 bar and 

+

 or 

–

 arrows

to select Yes. The value in the Array Disk column changes to Primary.

If partitions are defined on the selected disk, a message warns you that data on the

disk will be lost when the mirrored volume is created.

Navigate to the next disk for the IME volume (mirrored) disk for the IM volume and set the

Array Disk column value to Yes.

If partitions are defined on the selected disk, a message warns you that data on the

disk will be lost when the mirrored volume is created.

d. Press 

Delete

 to confirm that the data on the disk can be erased, or press any other key to

deselect the disk.

Repeat step 3 to select up to the workstation-specific maximum number of drives for the IME

volume, including configuration of a hot spare.

When all drives are selected, press 

C

 to create the array. Navigate to Save changes then

exit this menu and press 

Enter.

When the new array is created, the Adapter Properties screen appears. Press 

Esc

 twice, then

select Exit.

Configuring RAID on an LSI 2308 or LSI 9212-4i controller

173