HP (Hewlett-Packard) D3K21UT#ABA ユーザーズマニュアル

ページ / 160
Front Fan Assembly
Description
Spare part number
Front fan assembly
636922-001
The front fan assembly is attached to the front of the chassis.
1.
Prepare the computer for disassembly (
2.
Remove the access panel (
).
3.
Remove the front bezel (
).
4.
Remove the baffle (
5.
Disconnect the fan cable from the red/brown system board connector labeled CHFAN.
6.
Press the two tabs (left, bottom) that secure the fan assembly to the chassis front.
Figure 7-42
  Front fan tab locations
7.
Pull the assembly toward the rear of the unit, and then lift it out of the chassis.
Figure 7-43
  Removing the front fan
To install the front fan, reverse the removal procedure. Be sure to orient the air flow into the unit.
70
Chapter 7   Removal and Replacement Procedures Small Form Factor (SFF) Chassis