HP (Hewlett-Packard) D3K21UT#ABA ユーザーズマニュアル
Front I/O, Power Switch Assembly
Description
Spare part number
Front I/O and power switch assembly
636926-001
The front I/O and power switch/LEDs are one assembly, attached to the front of the chassis. Push the
assembly into the chassis to remove.
assembly into the chassis to remove.
1.
Prepare the computer for disassembly (
2.
Remove the access panel (
).
3.
Remove the front bezel (
).
4.
Remove the chassis fan (
).
5.
Rotate the drive cage to its upright position.
6.
Disconnect the four cables from the system board as follows:
●
Yellow connector labeled FRONT USB1
●
Green connector labeled FRONT USB2
●
Blue connector labeled FRONT AUD
●
Black connector labeled PB/LED
7.
Remove the screw that secures the assembly to the front of the chassis.
Figure 7-44
Removing the front I/O, power switch/LED assembly screw
Front I/O, Power Switch Assembly
71