HP (Hewlett-Packard) dv9700 ユーザーズマニュアル
2.
Remove the display switch module (2).
Reverse this procedure to install the display switch module.
Rear USB board
Description
Spare part number
Rear USB board (includes rear USB board cable)
449762-001
Before removing the rear USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
)
b.
Optical drive (see
)
c.
Switch cover (see
d.
Keyboard (see
)
e.
Speaker assembly (see
)
f.
Display assembly (see
)
g.
Top cover (see
90
Chapter 4 Removal and replacement procedures