HP (Hewlett-Packard) dv9700 ユーザーズマニュアル
System board
NOTE:
All system board spare kits include a modem module cable and hard drive thermal pads.
Description
Spare part number
System board for use with computer models with Intel processors:
With 256 MB of video system memory for use only with computer models with discrete video system
memory
memory
447983-001
With 128 MB of video system memory for use only with computer models with discrete video system
memory
memory
447982-001
System board for use only with computer models with UMA video system memory
447984-001
System board for use with computer models with AMD processors:
With discrete video system memory
450799-001
With UMA video system memory
450800-001
Processor bracket v8.1
450371-001
Processor bracket v7.9
450370-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
)
b.
Optical drive (see
)
c.
Switch cover (see
d.
Keyboard (see
)
e.
Speaker assembly (see
)
f.
Display assembly (see
)
g.
Top cover (see
h.
)
i.
j.
)
92
Chapter 4 Removal and replacement procedures