HP (Hewlett-Packard) H2D81US ユーザーズマニュアル

Read 

 before servicing this component.

This section describes how to remove and install a CPU.

To remove a CPU:

Disconnect power from the workstation (see 

Remove the side access panel (see 

Remove the CPU heatsink (see 

).

Raise the CPU socket lever   and open the cover 

2

 as shown in the following figure.

Do not touch the CPU socket contacts or the gold pads underneath the CPU. Use

extreme care and handle the CPU only by the edges.

Pull the CPU straight out of the socket  , and store the CPU in a static free container in a safe
place where it cannot be damaged

104 Chapter 5   Replacing components

ENWW