HP (Hewlett-Packard) H2D81US ユーザーズマニュアル

The side access panel solenoid lock provides a method to lock the side access panel by means of a
local or remote signal-controlled solenoid.

This section describes how to remove and install the side access panel solenoid lock.

To remove the side access panel solenoid lock:

Disconnect power from the workstation (see 

Remove the side access panel (see 

Remove the side access panel (see 

Disconnect the side access panel solenoid lock cable from the system board  .

Remove the two screws that fasten the solenoid lock to the chassis 

2

 as shown in the following

figure.

Pull the solenoid lock assembly inward and then up   to remove the assembly from the chassis.

  Removing the side access panel solenoid lock

Reverse the above steps to install the side access panel solenoid lock. This involves connecting the
solenoid lock cable to the system board and fastening the solenoid lock to the chassis.

ENWW

Removing and installing components

71