Emerson 480V ユーザーズマニュアル

The LBS function is activated with configuration software; when the LBS takes effect, the graphic 

LCD will display “LBS active.”

The Liebert NX uses intelligent and reliable decentralized technology to achieve parallel operation of 

two or more modules.
The parallel system is used to:

• Increase the reliability of the system to ensure adequate power supply to the critical load con-

nected.

• Increase serviceability and allow the execution of maintenance operations and repairs without 

affecting the ordinary operating conditions of the system (depending on the redundancy level).

• The controls for parallel UPS module operation are standard in the Liebert NX, and the configu-

ration can be set up by changing the settings in configuration software.

• It is easy to install the parallel cables in a ring, providing high reliability and redundancy. And 

the intelligent paralleling logic provides the user with maximum flexibility. For example, shut-

ting down or starting up the UPS modules in the parallel system can be done in any sequence. If 

an overload transfer occurs, the whole system can recover automatically from bypass mode after 

the overload is cleared.

• The total load of the parallel system can be queried from each module’s liquid crystal display 

screen.