HP (Hewlett-Packard) A1356A ユーザーズマニュアル

 

Installing the HP UPS Management Module  21 

Connecting the configuration cable 

1. 

Connect a DB-9 to RJ-45 adapter to a serial connector on the host computer. 

2. 

Connect one end of an RJ-45 cable to the RJ-45 connector on the adapter. 

 

3. 

Connect the other end of the RJ-45 cable to the Config/Pass-Thru connector on the management 
module. 

 

This connection is used to configure and access the management module locally through a terminal 

emulation program. 

 

Launching a terminal emulation program 

  

 

NOTE:

  HyperTerminal is the serial communication program provided with Microsoft® 

Windows® and is used in this section as an example for setting up a terminal emulation 
session. If you are using another utility, the steps might be different.