DELL 9.8(0.0) ユーザーズマニュアル

To enter CLASS-MAP mode:

1.

Verify that you are logged in to CONFIGURATION mode.

2.

Enter the class-map command then enter the class map name. The prompt changes to include 

(config-class-map). 

You can return to CONFIGURATION mode by using the exit command.

CONFIGURATION Mode

In EXEC Privilege mode, use the configure command to enter CONFIGURATION mode and configure 
routing protocols and access interfaces.
To enter CONFIGURATION mode:

1.

Verify that you are logged in to EXEC Privilege mode.

2.

Enter the configure command. The prompt changes to include (conf).

From this mode, you can enter INTERFACE mode by using the interface command.

CONTROL-PLANE Mode

.

To enter CONTROL-PLANE mode:

1.

Verify that you are logged in to CONFIGURATION mode.

2.

Enter the control-plane-cpuqos command. The prompt changes to include (conf-control-

cpuqos).

You can return to CONFIGURATION mode by using the exit command.

DCB POLICY Mode

To enable and configure a Data Center Bridging (DCB) input or output policy, use DCB POLICY mode. For 
more information, refer to 

To enter DCB POLICY mode:

1.

Verify that you are logged in to CONFIGURATION mode.

2.

To enable or configure a DCB input policy, enter the dcb-input command then enter the policy 

name. To enable or configure a DCB output policy, enter the dcb-output command then enter the 

policy name. The prompt changes to include (conf-dcb-in) for an input policy or (conf-dcb-out) for 

an output policy. 

You can return to CONFIGURATION mode by using the exit command.

DHCP Mode

To enable and configure Dynamic Host Configuration Protocol (DHCP), use DHCP mode. For more 
information, refer to 

.

To enter DHCP mode:

1.

Verify that you are logged in to CONFIGURATION mode.

54

CLI Basics