DELL 9.8(0.0) ユーザーズマニュアル

• TCP/UDP destination port

load-balance hg

Choose the traffic flow parameters the hash calculation uses while distributing the traffic across internal 
higig links.

Syntax

[no] load-balance hg {ip-selection | ipv6-selection [source-ip 
| source-ipv6 | source-port-id | source-module-id | dest-ip | 
dest-ipv6 | dest-port-id | dest-module-id | protocol | vlan | 
L4-source-port | L4-dest-port ] | mac [source-mac | source-
port-id | source-module-id | dest-mac | dest-port-id | dest-
module-id | vlan | ethertype | source-dest-mac ] | tunnel 
[ipv4-over-ipv4 | ipv4-over-gre-ipv4 | mac-in-mac]}

Parameters

{{ip-selection| 
ipv6-selection 
[source-ip | 
source-ipv6 | 
source-port-id 
| source-
module-id | 
dest-ip | dest-
ipv6 | dest-
port-id | dest-
module-id | 
protocol | vlan | 
L4-source-port 
| L4-dest-port ]

To use IPv4 key fields in hash computation, enter the 
keyword ip-selection then one of the parameters. To use 
IPv6 key fields in hash computation, enter the keyword 
ipv6-selection then one of the parameters.

• source-ip — Use IPv4 src-ip field in hash calculation.
• source-ipv6 — Use IPv6 src-ip field in hash calculation
• source-port-id — Use src-port-id field in hash 

calculation.

• source-module-id — Use src-module-id field in hash 

calculation.

• dest-ip — Use IPv4 dest-ip field in hash calculation.
• dest-ipv6 — Use IPv6 dest-ip field in hash calculation
• dest-port-id — Use dest-port-id field in hash calculation.
• dest-module-id — Use dest-module-id field in hash 

calculation.

• protocol — Use IPv4 protocol field in hash calculation.
• vlan — Use vlan field in hash calculation.
• L4-source-port — Use IPv4 L4-source-port field in hash 

calculation.

• L4-dest-port — Use IPv4 L4-dest-port field in hash 

calculation.

934

IPv4 Routing