Enterasys Networks VH-8G-L3 ユーザーズマニュアル
23
9033705-01
3. Connecting The Switch
This chapter describes how to connect the VH-8G-L3 to your
Ethernet network.
Ethernet network.
Switch to End Node
A PC can be connected to the Switch via a fiber optic cable.
The PC can be connected to any of the eight ports of the
Switch.
The PC can be connected to any of the eight ports of the
Switch.
Figure 3-1. Example of the Switch connected to a PC or
Workstation
The LED indicators for the port the end node is connected to
are lit according to the capabilities of the NIC. If LED
indicators are not illuminated after making a proper
connection, check the PC’s LAN card, the cable, switch
conditions, and connections.
are lit according to the capabilities of the NIC. If LED
indicators are not illuminated after making a proper
connection, check the PC’s LAN card, the cable, switch
conditions, and connections.
The following LED indicator state is possible for an end node
to switch connection: The Link/Act LED indicator lights up
upon hooking up a PC that is powered on.
to switch connection: The Link/Act LED indicator lights up
upon hooking up a PC that is powered on.
Switch to Hub or Switch
The Switch can be connected to another switch or other
devices (routers, bridges, etc.) via a fiber optic cable.
devices (routers, bridges, etc.) via a fiber optic cable.