Enterasys Networks VH-8G-L3 ユーザーズマニュアル
21
9033705-01
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf, the rubber
feet included with the device should first be attached. Attach
these cushioning feet on the bottom at each corner of the
device. Allow adequate space for ventilation between the
device and the objects around it.
feet included with the device should first be attached. Attach
these cushioning feet on the bottom at each corner of the
device. Allow adequate space for ventilation between the
device and the objects around it.
Figure 2-1. Installing rubber feet for desktop installation
Rack Installation
The VH-8G-L3 can be mounted in an EIA standard-sized,
19-inch rack, which can be placed in a wiring closet with
other equipment. To install, attach the mounting brackets on
the switch’s side panels (one on each side) and secure them
with the screws provided.
19-inch rack, which can be placed in a wiring closet with
other equipment. To install, attach the mounting brackets on
the switch’s side panels (one on each side) and secure them
with the screws provided.
Figure 2- 2A. Attaching the mounting brackets
Then, use the screws provided with the equipment rack to
mount the Switch on the rack.
mount the Switch on the rack.