Enterasys Networks 6H3xx ユーザーガイド
Module Selection Screen
Accessing Local Management
3-11
Field Descriptions
for a functional description of each screen field.
3.4.1
Selecting a Module
To select an individual module to perform Local Management functions, proceed as follows:
1. Use the arrow keys to highlight the desired module number in the Module # field.
2. Press ENTER, the applicable Module Menu screen displays. Proceed to
Table 3-2
Module Selection Screen Field Descriptions
Use this field…
To…
Module #
(Selectable)
(Selectable)
Display the slot in which the module is installed. The module number
enclosed in angle brackets (< >) indicates the module to which the
management terminal or Telnet session is currently connected.
enclosed in angle brackets (< >) indicates the module to which the
management terminal or Telnet session is currently connected.
Module Type
(Read-Only)
(Read-Only)
Display the type of interface module that is installed in each slot.
Serial #
(Read-Only)
(Read-Only)
Display the serial number of the module. The serial number of the
device is necessary when calling Enterasys Networks concerning the
module.
device is necessary when calling Enterasys Networks concerning the
module.
Hardware Revision
(Read-only)
(Read-only)
Display the hardware version of the module.