Siemens SCALANCE XB-200 ユーザーズマニュアル
Description of the device
2.3 RESET button
SCALANCE XB-200
16
Operating Instructions, 02/2015, C79000-G8976-C359-01
2.3
RESET button
Position
The "RESET" button is located on the rear of the SCALANCE XB-200.
Figure 2-1
Position of the "RESET" button, for example on the SCALANCE XB213-3
Resetting the device to factory defaults
Note
If you reset, all the changes you have made will be overwritten by factory defaults.
If you reset, all the changes you have made will be overwritten by factory defaults.
To reset the device to the factory defaults, follow the steps below:
1. Press the "RESET" button, for example with a screwdriver and keep it pressed for
1. Press the "RESET" button, for example with a screwdriver and keep it pressed for
approximately 12 seconds.
After 9 seconds, the fault LED "F" flashes for 3 seconds.
If you release the button after approximately 12 seconds, the device is restarted and the
After 9 seconds, the fault LED "F" flashes for 3 seconds.
If you release the button after approximately 12 seconds, the device is restarted and the
factory settings are restored.
If you release the button before the 12 seconds have elapsed, the reset is canceled.
If you release the button before the 12 seconds have elapsed, the reset is canceled.
Enabling and disabling the button
Using the WBM and CLI, you can enable or disable the button function.