Avaya P332MF ユーザーズマニュアル
Chapter 6
CLI – Layer 2
Avaya P332MF User’s Guide
111
set port security
Use the
set port security
command to enable MAC security on a port or a
range of ports at the module level. The port security is activated only after you
enable the secutity mode at the stack level using the
enable the secutity mode at the stack level using the
set security mode
command.
Note:
This command is not supported in P332G-ML and P332GT-ML switches. This
command is used to set port security for ports in other P330 switches in the stack.
The syntax for this command is:
set port security { enable | disable } [<module>[/<port>]]
Output Example:
P330-N> set port security enable 1/2
Port 1/2 secured.
set cascading
Use the
set cascading
command to enable or disable fault-trap sending for
unconnected cascading links. The default setting is disable.
The syntax for this command is:
set cascading{up|down}fault-monitoring {enable|disable}
<mod-num>
Output Example:
P330-N# set cascading down fault-monitoring enable 1
Module 1 cascading-down fault monitoring enabled.
set inband vlan
Use the
set inband vlan
command to set a value for the management vlan
(from 1 to 3071).
enable | disable
Set the port security enable or disable
module/port
The switch number/the port number