HP (Hewlett-Packard) A3100-8 DC EI ユーザーズマニュアル

 

Web login 

Web login overview 

The device provides a built-in web server that enables you to log in to the web interface of the device from 

a PC. Web login is disabled by default.  
To enable web login, log in to the device via the console port, and perform the following configuration: 

• 

Enable HTTP or HTTPS service 

• 

Configure the IP address of the VLAN interface 

• 

Configure a username and password 

The device supports the following web login methods: 

• 

HTTP login: The Hypertext Transfer Protocol (HTTP) is used for transferring web page information 
across the Internet. It is an application-layer protocol in the TCP/IP protocol suite. The 

connection-oriented Transport Control Protocol (TCP) is adopted at the transport layer. The device 

supports HTTP 1.0. 

• 

HTTPS login: The Secure HTTP (HTTPS) refers to the HTTP protocol that supports the Security Socket 
Layer (SSL) protocol. HTTPS uses SSL to encrypt the data exchanged between the HTTPS client and 

the server to ensure data security and integrity. You can define a certificate attribute-based access 
control policy to allow legal clients to access the device securely and to prohibit illegal clients. 

The following table shows the configuration requirements of web login. 

Object Requirements 

Configure the IP address of the VLAN interface 
Make sure the device and the PC can reach each other

 

 

Device  

Required to use one approach  

Install a web browser 

PC  

Obtain the IP address of the VLAN interface of the device

 

 

Configuring HTTP login 

Follow these steps to configure HTTP login: 

To do… 

Use the command… 

Remarks 

Enter system view 

system-view 

— 

Enable the HTTP service 

ip http enable 

Required 
Enabled by default.

 

66