HP (Hewlett-Packard) A3100-8 DC EI ユーザーズマニュアル

To do…

Use the command…

Remarks

Configure the HTTP service port
number

ip http port port-number

Optional
80 by default.
If you execute the command

multiple times, the last one takes

effect.

Associate the HTTP service with an
ACL

ip http acl acl-number

Optional
By default, the HTTP service is not
associated with any ACL.
Associating the HTTP service with
an ACL enables the device to allow

only clients permitted by the ACL to

access the device.

Create a local user and enter local
user view

local-user user-name

Required
By default, no local user is

configured.

Configure a password for the local
user

password { cipher | simple }
password

Required
By default, no password is
configured for the local user.

Specify the command level of the
local user

authorization-attribute level level

Required
No command level is configured
for the local user.

Specify the Telnet service type for
the local user

service-type telnet

Required
By default, no service type is

configured for the local user.

Exit to system view

quit

—

Create a VLAN interface and enter
its view

interface vlan-interface
vlan-interface-id

Required
If the VLAN interface already
exists, the command enters its

view.

Assign an IP address and subnet
mask to the VLAN interface

ip address ip-address { mask |
mask-length }

Required
By default, no IP address is
assigned to the VLAN interface.

Configuring HTTPS login

Follow these steps to configure HTTPS login:

To do…

Use the command…

Remarks

Enter system view

system-view

—