HP (Hewlett-Packard) A3100-8 DC EI ユーザーズマニュアル
To do…
Use the command…
Remarks
Terminate the connection to the FTP server
without exiting FTP client view
without exiting FTP client view
disconnect
Optional
Equal to the close command.
Equal to the close command.
Terminate the connection to the FTP server
without exiting FTP client view
close
Optional
Equal to the disconnect
Equal to the disconnect
command.
Terminate the connection to the FTP server
and return to user view
and return to user view
bye
Optional
Equal to the quit command in
Equal to the quit command in
FTP client view.
Terminate the connection to the FTP server
and return to user view
and return to user view
quit
Optional
Available in FTP client view,
equal to the bye command.
Available in FTP client view,
equal to the bye command.
FTP client configuration example
Network requirements
•
As shown in
, use the device as an FTP client and the PC as the FTP server. Their IP
addresses are 10.2.1.1/16 and 10.1.1.1/16 respectively. The device and PC can reach each other.
•
The device downloads a system software image file from the PC for device upgrade, and uploads
the configuration file to the PC for backup.
the configuration file to the PC for backup.
•
On the PC, an FTP user account has been created for the FTP client, with the username abc and the
password pwd.
password pwd.
Figure 37 Network diagram for FTPing a system software image file from an FTP server
Configuration procedure
CAUTION:
If the available memory space of the device is not enough, use the fixdisk command to clear the memory
or use the delete /unreserved
or use the delete /unreserved
file
-
url
command to delete the files not in use and then perform the following
operations.
# Log in to the server through FTP.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1
Connected to 10.1.1.1
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
90