HP (Hewlett-Packard) A3100-8 DC EI ユーザーズマニュアル
To do…
Use the command…
Remarks
Use an ACL to control FTP clients’
access to the switch
access to the switch
ftp server acl acl-number
Optional
By default, no ACL is used to control
FTP clients’ access to the switch.
By default, no ACL is used to control
FTP clients’ access to the switch.
Configure the idle-timeout timer
ftp timeout minutes
Optional
30 minutes by default.
Within the idle-timeout time, if there is
no information interaction between
30 minutes by default.
Within the idle-timeout time, if there is
no information interaction between
the FTP server and client, the
connection between them is
terminated.
terminated.
Set the file update mode for the FTP
server
ftp update { fast | normal }
Optional
Normal update is used by default.
Normal update is used by default.
Quit to user view
quit
—
Manually release the FTP
connection established with the
connection established with the
specified username
free ftp user username
Optional
Available in user view
Available in user view
Configuring authentication and authorization on the FTP server
To allow an FTP user to access certain directories on the FTP server, you must create an account for the
user, authorizing access to the directories and associating the username and password with the account.
The following configuration is used when the FTP server authenticates and authorizes a local FTP user. If
The following configuration is used when the FTP server authenticates and authorizes a local FTP user. If
the FTP server needs to authenticate a remote FTP user, you must configure authentication, authorization
and accounting (AAA) policy instead of the local user. For detailed configuration, see the Security
Command Reference.
In local authentication, the switch checks the input username and password against those configured on
Command Reference.
In local authentication, the switch checks the input username and password against those configured on
the switch. In remote authentication, the switch sends the input username and password to the remote
authentication server, which then checks whether they are consistent with those configured on the switch.
Follow these steps to configure authentication and authorization for FTP server:
Follow these steps to configure authentication and authorization for FTP server:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a local user and enter its
view
view
local-user user-name
Required
No local user exists by default, and
the system does not support FTP
No local user exists by default, and
the system does not support FTP
anonymous user access.
Assign a password to the user
password { simple | cipher }
password
password
Required
Assign the FTP service to the user
service-type ftp
Required
By default, the system does not
By default, the system does not
support anonymous FTP access,
and does not assign any service. If
and does not assign any service. If
the FTP service is assigned, the root
directory of the switch is used by
default.
default.
92