HP (Hewlett-Packard) 331404-008 ユーザーズマニュアル
Information Menu 33
Table 18
Layer 2 Information menu options
Command Usage
dump
Dumps all switch information available from the Layer 2 menu (10K or more, depending on your
configuration).
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
configuration).
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
FDB information menu
Command:
/info/l2/fdb
[Forwarding Database Menu]
find - Show a single FDB entry by MAC address
port - Show FDB entries on a single port
vlan - Show FDB entries on a single VLAN
state - Show FDB entries by state
dump - Show all FDB entries
find - Show a single FDB entry by MAC address
port - Show FDB entries on a single port
vlan - Show FDB entries on a single VLAN
state - Show FDB entries by state
dump - Show all FDB entries
The forwarding database (FDB) contains information that maps the media access control (MAC) address of each
known device to the GbE2 Interconnect Switch port where the device address was learned. The FDB also shows
which other ports have seen frames destined for a particular MAC address.
NOTE:
The master forwarding database supports up to 16K MAC address entries on the management
processor (MP) per GbE2 Interconnect Switch.
Table 19
FDB information menu
/info/l2/fdb
Command
Usage
find <MAC address> [<VLAN>]
Displays a single database entry by its MAC address. You are prompted
to enter the MAC address of the device.
Enter the MAC address using the format: xx:xx:xx:xx:xx:xx. (For
example: 08:00:20:12:34:56)
You can also enter the MAC address using the format: xxxxxxxxxxxx.
(For example: 080020123456)
to enter the MAC address of the device.
Enter the MAC address using the format: xx:xx:xx:xx:xx:xx. (For
example: 08:00:20:12:34:56)
You can also enter the MAC address using the format: xxxxxxxxxxxx.
(For example: 080020123456)
port <port number>
Displays all FDB entries for a particular port.
vlan <1-4095>
Displays all FDB entries on a single VLAN.
state unknown|ignore|
forward|flood|trunk|ifmac
Displays all FDB entries that match a particular state.
dump
Displays all entries in the Forwarding Database.
Show all FDB information
Command:
/info/l2/fdb/dump
MAC address VLAN Port State
----------------- ---- ---- -----
00:02:01:00:00:00 300 23 FWD
00:02:01:00:00:01 300 23 FWD
00:02:01:00:00:02 300 23 FWD
00:02:01:00:00:03 300 23 FWD
00:02:01:00:00:04 300 23 FWD
00:02:01:00:00:05 300 23 FWD
00:02:01:00:00:06 300 23 FWD
00:02:01:00:00:07 300 23 FWD
00:02:01:00:00:08 300 23 FWD
00:02:01:00:00:09 300 23 FWD
00:02:01:00:00:0a 300 23 FWD
00:02:01:00:00:0b 300 23 FWD
00:02:01:00:00:0c 300 23 FWD
----------------- ---- ---- -----
00:02:01:00:00:00 300 23 FWD
00:02:01:00:00:01 300 23 FWD
00:02:01:00:00:02 300 23 FWD
00:02:01:00:00:03 300 23 FWD
00:02:01:00:00:04 300 23 FWD
00:02:01:00:00:05 300 23 FWD
00:02:01:00:00:06 300 23 FWD
00:02:01:00:00:07 300 23 FWD
00:02:01:00:00:08 300 23 FWD
00:02:01:00:00:09 300 23 FWD
00:02:01:00:00:0a 300 23 FWD
00:02:01:00:00:0b 300 23 FWD
00:02:01:00:00:0c 300 23 FWD
An address that is in the forwarding (FWD) state indicates that the GbE2 Interconnect Switch has learned it. When in
the trunking (TRK) state, the port field represents the trunk group number. If the state for the port is listed as unknown