Black Box LEH8814 ユーザーズマニュアル

 

Port Trunking 
 
Port Trunking 
1. 

Command Mode: Interface mode 

Logon to Configure Mode (Configure Terminal Mode). 
Then logon to Interface mode. 
fe1 means port 1. 
The switch_a(config-if)# prompt will show on the screen. 

switch_a(config)#interface fe1 
switch_a(config-if)# 

 
2. Usage: 
Use static-channel-group command to create a static aggregator, or add a 
member port to an already-existing static aggregator. 
Use the no static-channel-group command to detach the port from the 
static aggregator. 
 
3. Command 

Syntax: 

static-channel-group <1-3> 
no static-channel-group 

<1-3> Channel group number. 

  Maximum 4 ports in static-channel-group 1 and static-channel-group 2. 

Maximum 2 ports in static-channel-group 3 

 
4. Example: 
The following example adding the interface fe1 (port 1) to 
static-channel-group 1

: 

switch_a(config)#interface fe1 
switch_a(config-if)#static-channel-group 1 
switch_a(config-if)#