Black Box LEH8814 ユーザーズマニュアル

 

Global Configuration, RSTP Port 
 
Global Configuration 
STP Version: 
1. 

Command Mode: Configure mode 

Logon to Configure Mode (Config
The switch_a(config)# prompt will show 

switch_a(config)# 

Setting, Ring Setting 

ure Terminal Mode). 

on the screen. 

 
2. Usage: 
Use this command to choose the Spanni

anning 

Tree protocol on a bridge. 
 
3. Command 

Syntax: 

bridge GROUP protocol PROTOCOL vlan-

GROUP <1-1> Bridge group name used for bridging. 
PROTOCOL 
  ieee IEEE 802.1Q spanning-tree protocol. 
  rstp IEEE 802.1w rapid spanning-tree protocol. 

 
4. Example: 
The following example chooses the PROTOCOL (rstp) on bridge GROUP 
(1): 

switch_a(config)#bridge 1 protocol rstp vlan-bridge 
switch_a(config)# 

ng Tree protocol or Rapid Sp

bridge 

 

 
Rapid Spanning Tree Protocol: 
1. 

Command Mode: Configure mode 

Logon to Configure Mode (Configure Terminal Mode). 
The switch_a(config)# prompt will show on the screen. 

switch_a(config)# 

 

 
2. Usage: 
Use this command to enable the Rapid Spanning Tree protocol on a bridge. 
Use the no form of the command to disable the Rapid Spanning Tree protocol 
on a bridge. 
 
3. Command 

Syntax: 

bridge GROUP rapid-spanning-tree enable 
no bridge GROUP rapid-spanning-tree enable BRIDGE-FORWARD 

GROUP <1-1> Bridge group name used for bridging. 
BRIDGE-FORWARD Puts all ports of the specified bridge into the