Lathem LTR4-512 ユーザーズマニュアル
LTRx-512 User’s Guide
You can see your terminal ID# and baud rate by using the “Quick Check” command [*] when
the LTR8-512 is in Clock Mode
the LTR8-512 is in Clock Mode
[C]=Change Password
Use this function to change the default user password (000000) to a unique 6-digit number to
prevent unauthorized access to the LTRx-512’s programming functions. You should keep a
copy of this password in a safe place
You cannot choose function [C] directly. To start the Change Password function, enter your
current password, then press [#][9][0][0][0][#]
prevent unauthorized access to the LTRx-512’s programming functions. You should keep a
copy of this password in a safe place
You cannot choose function [C] directly. To start the Change Password function, enter your
current password, then press [#][9][0][0][0][#]
NEW
PASSWORD
000000
To keep your old password, press [*] to cancel
To change the password, enter a 6-digit number, then press [#]. You will see
To change the password, enter a 6-digit number, then press [#]. You will see
PRESS
[#]
IF
CORRECT
Press [#] to accept, or press [*] to cancel and try again
Once you change your password, your LTRx-512 will no longer accept the old password
You can always change your password again if needed
17