Lathem LTR4-512 ユーザーズマニュアル

LTRx-512 User’s Guide 

       ENT.DATE: 04-03-2003 
       TODAY IS         THURSDAY 
       ENTER TIME:   21:00 
       PRESS [#] IF CORRECT

 

 

Press the [#] key at the top (‘00’ seconds) of the new minute to accept. If the time or date is not 
correct, press [*] to cancel and try again. 

 

The display will now show the time and date you just entered. You can toggle between the 
12-hour and 24-hour display using “Quick Check” command [3] 

 

Make sure you enter the correct date and day, because the schedules you setup depend on 
these choices 

 
[2]=Select Clock Control 
 

This function requires the administrator password 

 

Use this function to choose the make/model of the clocks that your Master will synchronize 
(Note: The LTR4-512 can only synchronize one type of secondary system) 
 
Enter your administrator password, then start this function by pressing [#][2][#] 

 

ENABLE CLOCK CIRCUIT   
 

 

SELECT CLK1 CODE: NN   
[#] FOR CODE LIST 

 

 

Enter the 2-digit code for CLOCK1, then press [#]. If you entered a code other than ‘00’, and 
you have a LTR8-512 or LTR8-512M, you will see 

ENABLE CLOCK CIRCUIT   
 

 

SELECT CLK2 CODE: NN   
[#] FOR CODE LIST 

  

 

 

 

 

Enter the code for CLOCK2, or [0][0] if you will not use a CLOCK2, then press [#] 

 
   PRESS 

[#] 

IF 

CORRECT 

 

Enter [#] to confirm or [*] to cancel and try again 

 

9