HP (Hewlett-Packard) RP3440 ユーザーズマニュアル

Additional Controls and Indicators

HP 9000 rp3410 and rp3440 servers can have up to three low-voltage differential (LVD), 3.5-inch
form factor hot-pluggable disk drives installed. These disk drives have LEDs that provide status
and activity information.

Hot-Pluggable Disk Drive Indicators

The disk drives have two LEDs per drive, as follows:

Status LED

Not used on the HP 9000 rp3410 or rp3440 server.

Activity LED

Flashing green and indicates disk drive activity.

This LED is directly controlled by the disk drive and turns on when a drive
is accessed.

Figure 1-9

shows the hot-pluggable disk drive LED indicators.

Figure 1-9 Hot-Pluggable Disk Drive LED Indicators

Table 1-8

lists the hot-pluggable disk drive LED definitions.

Table 1-8 Hot-Pluggable Disk Drive LED Definitions

Description

State

LED

Not used

None

Status LED

Reading and scanning hard drive

Flashing green

Activity LED

Optional Removable Media Drive

HP 9000 rp3410 and rp3440 servers are delivered without a removable media drive. You can add
either a DVD or CD-RW/DVD drive. Each of these optional devices has one activity LED.

Figure 1-10

shows the DVD drive details.

Figure 1-10 DVD Drive

Table 1-9

lists the DVD drive LED definitions.

Table 1-9 DVD Drive LED Definitions

Description

State

LED

Drive is active

Flashing green

Activity LED

Controls, Ports, and LEDs