Fujitsu N800 ユーザーズマニュアル
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
U41243-J-Z156-1-76
69
Configuration software and utilities
Utilities
5.4.2
BIOS update
5.4.2.1
Preparations
Before you update BIOS, record the current BIOS settings, obtain the utility, and
make a copy of the current BIOS.
make a copy of the current BIOS.
Recording the current BIOS settings
Ê
Start the server and press
[F2]
when the following message is displayed on
the screen:
Press <F2> key if you want to run SETUP
Ê
Write down the current settings from the
BIOS Setup
program.
I
Do not skip set 2. You will need these settings to configure your
computer at the end of the procedure.
computer at the end of the procedure.
Creating bootable floppy disks
Ê
Use a DOS or Windows 95 system to create the floppy disk.
Ê
Insert the disk in drive A.
Ê
At the C:\ prompt, enter the following for an unformated floppy disk:
format a:/s
or the following for a formated floppy disk:
sys a:
Ê
Press
Ú
.
Ê
Copy the flash files generated as described in section “BIOS and firmware
update” on page 70 to your bootable floppy disks.
update” on page 70 to your bootable floppy disks.