Lucent Technologies lucent ユーザーズマニュアル
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-462
DIOD-TRK (DIOD Trunk), DIOD-BD (DIOD Circuit Pack) [G1.2SE]
10
DIOD-TRK (DIOD Trunk), DIOD-BD
(DIOD Circuit Pack) [G1.2SE]
(DIOD Circuit Pack) [G1.2SE]
1.
Where P is the port network number (1 for PPN, 2 for EPN, and 3 for the second EPN);
C is the carrier designation (for example, A, B, C, D, or E); and SS is the address of
the slot in the carrier where the circuit pack is located (for example, 01, 02, ...etc.)
C is the carrier designation (for example, A, B, C, D, or E); and SS is the address of
the slot in the carrier where the circuit pack is located (for example, 01, 02, ...etc.)
2.
Where
1
is Long,
s
is Short, and
r
is repeat. Refer to the XXX-BD (Common Port
Board) Maintenance Documentation.
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
Full Name of MO
DIOD-BD
2
MINOR
test port PCSS s
DIOD Circuit Pack